Tag: 3D Printing

Super Ultra Compact Pan/Tilt Camera Mount – V2

[Publish 20161001]

New Version Super Ultra Compact Pan/Tilt Camera Mount

https://www.thingiverse.com/thing:1799905

Old Versions: V1

https://www.thingiverse.com/thing:1242570

https://www.thingiverse.com/thing:350229

This pan-tilt kit is the perfect way to give your project full range motion with two micro servos.
The pan-tilt can rotate roughly 180° from side-to-side and can tilt up&downwards around 180°.
Using two Micro Servos. (Turnigy TG9G, Tower Pro SG90 or SG-92 type)

2 x 9G Servos
4 x 2mm 5mm Tapping screws [For Servo mount]
2 x 2mm 7mm Tapping screws [For Servo hone mount]
2 x M2 6mm [For pan tilt shaft mount]
4 x M2 10mm [For camera mount]
7 x M2 12mm [For base case mount]
3 x M2 Nuts [For base case mount]
4 x M3 15mm [For vert mount]

Two type:
Stand alone and PAN servo landfill type

I look forward to seeing your build !!
Enjoy!

The open source SUCPT Cam hardware is free and made with love. Please show your level of support with a voluntary donation.

Donate:
https://www.paypal.com/cgi-bin/webscr?cmd=_s-xclick&hosted_button_id=RDN7ZGAVFS5UE

——– Type A ——–

——– Type B ——–

ProfileBlock™ – DIY Robot Platform – Design Concepts

[ Upload design concept 20170418]

ProfileBlock – DIY Robots & Rover & RC & Etc. Platform

3D Design Tool: SketchUp Pro

ProfileBlock’s robots are built on top of an open source Arduino-based(with ESP8266, Raspberry Pi) platform.

    • drawBot: Drawing Robot (Polargraph, Pen, …
    • Rover

Self Balancing Robot (eX-Robot, B-Robot, Roverbot, …

Hardware

Base Plate(Parts):

  • Profile DF 2020
  • Profile DRF 2020
  • Acrylic Plate
  • 3D Printing Parts

Step Motor:

  • NEMA 17 – Phase: 4, Step Angle: 1.8 Deg/Step, Holding Torque: 2.6Kg.cm
  • 28BYJ-48

Servo:

  • Standard Servo
  • SG90 Servo

Electrical

Control Board:

  • Arduino
  • ESP8266
  • Raspberry Pi

Power Requirements:

  • 4.2DVC
  • 8.4VDC
  • 12 VDC

Battery:

  • 18650 x 2ea
  • 16340 x 2ea

The open source ProfileBlock hardware and software is free and made with love. Please show your level of support with a voluntary donation.

Donate:
https://www.paypal.com/cgi-bin/webscr?cmd=_s-xclick&hosted_button_id=RDN7ZGAVFS5UE

Desktop Cooling FAN & LED Light – DeskFAN

DeskFAN
120 mm FAN LED Light – 3D Design

3D Design Tool: SketchUp Pro
Design concept: Honeybee

Features

  • Stand and Wall mount
  • 90 degree Pan and 270 degree tilt
  • FAN Speed Control (with LED Light)
  • Mode SW: FAN, LED Light, FAN+LED Light

    Parts List

  • 120 mm FAN (12 VDC, 4,32 Watt) …………………….. 1 ea
  • 2 Watt LED Module 42 mm diameter, 12 VDC ……. 1 ea
  • Power Switch………………………………………………….. 2 ea
  • Select Switch ………………………………………………….. 1 ea
  • Variable resistor (10 Kohm) …………………………….. 1 ea
  • DC-DC Converter (Input: 12VDC, Output: Variable) ….. 1 ea
    (** FAN Speed & LED Light variable control)
  • DC Jack (using the Adaptor) ……………………………… 1 ea
  • AC-DC Converter (Input: 220 VAC, Output: 12 VDC) …..1 ea
  • M4 50 mm Bolts ……………………………………………… 4 ea
  • M4 Nuts ………………………………………………………… 4 ea
  • M3 10 mm Bolts ……………………………………………… 8 ea
    (** Power supply is Built-in AC-DC Converter or 12 VDC Adaptor)

    3D Print Parts

  • Front Cover ……………………… 1 ea
  • Rear Cover ………………………. 1 ea
  • Front Guard ……………………… 1 ea
  • Rear Guard ……………………….. 1 ea
  • Rod …………………………………. 2 ea
  • Rod Clip ………………………….. 10 ea
  • Rod Body Clip …………………… 1 ea
  • Top Body ………………………….. 1 ea
  • Bottom Cover ……………………. 1 ea
  • Dial Knob ………………………….. 1 ea

    3D Files:

    https://www.thingiverse.com/thing:923761

    Thanks for watching!…….coming soon!……Updating……

DIY 3D Printer PANDORA DXs

DIY 3D Printer – PANDORA DXs (Design eXtreme single)
3D Design Tool: SketchUp Pro

Technical Specifications

Printing

Technology: FFF(Fused Filament Fabrication) / H-Bot(CoreXY)
Build Volume: 223 (W) x 225 (D) x 165 (H) mm

  • Heatbed
    Layer Resolution: 50-200 microns
    Filament: ABS or PLA, Nyron, HIPS, PVA… 1.75 mm diameter
    Nozzle Diameter: 0.4 mm (0.2mm, 0.3mm, 0.8mm)
    Print File Type: .Gcode, .STL
    Layer Resolutions:
  • Fast: 200 micron (0.2 mm)
  • Normal: 100 micron (0.1 mm)
  • hHigh: 0.06 micron (0.06 mm)
  • Ultra High: 0,04 micron (0.04 mm)

    Size and Weight

    Product Dimensions: 426 (W) x 433 (D) x 500 (H) mm
    Product Weight: 11 kg

    Software

    Software Bundle: Cura, Slic3r, KISSlicer / Octoprint, Printrun, Repetier-Host, MatterControl
    Supported File Types: .STL, .OBJ, .AMF, .Gcode
    Operating Systems: All (Web-based): Windows, Mac OS, Linux

    Firmware

    Arduino: Modified Marlin v1.0.0
    Raspberry Pi: Rasbian, Octoprint, SSH, Samba, VNC, WiringPi

    Hardware

    Base Plate: Profile DRF 3030, Acrylic
    Step Motor: NEMA 17 – Phase: 4, Step Angle: 1.8 Deg/Step, Holding Torque: 2.6Kg.cm

  • X/Y/Z/E – 4EA
    Cartesian (xyz): X/Y Head: LM Guide, Z Bed: 10mm Linear Shaft and 8D Screw Rod

    Electrical

    Control Board: Arduino Mega 2560
    Control Shield: Ramps 1.4 Board
    Display Board: Reprap Discount Smart Controller LCD 2004
    Raspberry Pi: Raspberry Pi B
    Camera: Raspberry Camera
    Power Requirements: AC 100 – 240 V, 1.4 Amps, 50-60 Hz, 220 W
    Connectivity: USB, SD Card, Wi-Fi (Web-based)
    Temperature:

  • Nozzle temperature: 170 – 270
  • Heated bed temperature: 50 – 100
  • Operational temperature: 10 – 40
  • Storage temperature: 0 – 32

    https://www.thingiverse.com/thing:917718

    Thanks for watching!……..Coming soon!……..Updating……

The open source PANDORA DXs hardware and software is free and made with love. Please show your level of support with a voluntary donation.

Donate:
https://www.paypal.com/cgi-bin/webscr?cmd=_s-xclick&hosted_button_id=RDN7ZGAVFS5UE

FAN 90mm Replacement

3D Printer: PANDORA DXs – DIY Desktop 3D Printer

Slicer: Cura 14.12.1

Layer height (mm): 0.1
Shell thickness (mm): 0.8

Bottom/Top thickness (mm): 0.8
Fill Density (%): 0

Print speed (mm/s): 60
Print temperature: 190
Bed temperature: 60

Filament: PLA
Filament Diameter (mm): 1.75

3D Files:

https://www.thingiverse.com/thing:914300

Kitchen Sink Drain Cover

3D Printer: PANDORA DXs – DIY Desktop 3D Printer

3D Design Tool: SketchUp Pro

Slicer: Cura 14.12.1

Layer height (mm): 0.1
Shell thickness (mm): 0.8

Bottom/Top thickness (mm): 0.8
Fill Density (%): 0

Print speed (mm/s): 60
Print temperature: 190
Bed temperature: 60

Filament: PLA
Filament Diameter (mm): 1.75

Coating… After printing
Used 3mm tapping screw

3D Files:

https://www.thingiverse.com/thing:914094

Welcome to Zalophus’s DesignHouse

   PANDORA DXs   
 – Live streaming –

DesignHouse  (Tistory) to DesignHouse (Blogspot)

  • 3D Printer (PANDORA DXs / Hexabot)
  • 3D Printing
  • 3D Modeling (SketchUp / …)
  • Home IoT
  • Home Automation (Light Control / FAN / Heater / Timer / …)
  • Home Security
  • Weather Station (Temperature / Humidity / …)
  • Sensor Network (MeshNet / …)
  • Robotics (Rover / Balancing Robot / Drawing Robot / Humanoid Robot / Hexapod Robot / HomeGuard Robot / …)
  • FPV (Drone / Rover / RC Car / Robot / …)

3D Printer List

Self Balancing Robot

Drawing Robot

Home IoT

Thingiverse / YouMagine / pinshape

YouTube Channel
https://www.youtube.com/channel/UCta1N6Lfj_MFRDw1_KjwpSw