Desktop Cooling FAN & LED Light – DeskFAN

DeskFAN
120 mm FAN LED Light – 3D Design


3D Design Tool: SketchUp Pro
Design concept: Honeybee


Features

  • Stand and Wall mount
  • 90 degree Pan and 270 degree tilt
  • FAN Speed Control (with LED Light)
  • Mode SW: FAN, LED Light, FAN+LED Light

    Parts List

  • 120 mm FAN (12 VDC, 4,32 Watt) …………………….. 1 ea
  • 2 Watt LED Module 42 mm diameter, 12 VDC ……. 1 ea
  • Power Switch………………………………………………….. 2 ea
  • Select Switch ………………………………………………….. 1 ea
  • Variable resistor (10 Kohm) …………………………….. 1 ea
  • DC-DC Converter (Input: 12VDC, Output: Variable) ….. 1 ea
    (** FAN Speed & LED Light variable control)
  • DC Jack (using the Adaptor) ……………………………… 1 ea
  • AC-DC Converter (Input: 220 VAC, Output: 12 VDC) …..1 ea
  • M4 50 mm Bolts ……………………………………………… 4 ea
  • M4 Nuts ………………………………………………………… 4 ea
  • M3 10 mm Bolts ……………………………………………… 8 ea
    (** Power supply is Built-in AC-DC Converter or 12 VDC Adaptor)


    3D Print Parts

  • Front Cover ……………………… 1 ea
  • Rear Cover ………………………. 1 ea
  • Front Guard ……………………… 1 ea
  • Rear Guard ……………………….. 1 ea
  • Rod …………………………………. 2 ea
  • Rod Clip ………………………….. 10 ea
  • Rod Body Clip …………………… 1 ea
  • Top Body ………………………….. 1 ea
  • Bottom Cover ……………………. 1 ea
  • Dial Knob ………………………….. 1 ea

    3D Files:

    https://www.thingiverse.com/thing:923761


    Thanks for watching!…….coming soon!……Updating……

DIY 3D Printer PANDORA DXs

DIY 3D Printer – PANDORA DXs (Design eXtreme single)
3D Design Tool: SketchUp Pro


Technical Specifications


Printing


Technology: FFF(Fused Filament Fabrication) / H-Bot(CoreXY)
Build Volume: 223 (W) x 225 (D) x 165 (H) mm

  • Heatbed
    Layer Resolution: 50-200 microns
    Filament: ABS or PLA, Nyron, HIPS, PVA… 1.75 mm diameter
    Nozzle Diameter: 0.4 mm (0.2mm, 0.3mm, 0.8mm)
    Print File Type: .Gcode, .STL
    Layer Resolutions:
  • Fast: 200 micron (0.2 mm)
  • Normal: 100 micron (0.1 mm)
  • hHigh: 0.06 micron (0.06 mm)
  • Ultra High: 0,04 micron (0.04 mm)

    Size and Weight


    Product Dimensions: 426 (W) x 433 (D) x 500 (H) mm
    Product Weight: 11 kg


    Software


    Software Bundle: Cura, Slic3r, KISSlicer / Octoprint, Printrun, Repetier-Host, MatterControl
    Supported File Types: .STL, .OBJ, .AMF, .Gcode
    Operating Systems: All (Web-based): Windows, Mac OS, Linux


    Firmware


    Arduino: Modified Marlin v1.0.0
    Raspberry Pi: Rasbian, Octoprint, SSH, Samba, VNC, WiringPi


    Hardware


    Base Plate: Profile DRF 3030, Acrylic
    Step Motor: NEMA 17 – Phase: 4, Step Angle: 1.8 Deg/Step, Holding Torque: 2.6Kg.cm

  • X/Y/Z/E – 4EA
    Cartesian (xyz): X/Y Head: LM Guide, Z Bed: 10mm Linear Shaft and 8D Screw Rod


    Electrical


    Control Board: Arduino Mega 2560
    Control Shield: Ramps 1.4 Board
    Display Board: Reprap Discount Smart Controller LCD 2004
    Raspberry Pi: Raspberry Pi B
    Camera: Raspberry Camera
    Power Requirements: AC 100 – 240 V, 1.4 Amps, 50-60 Hz, 220 W
    Connectivity: USB, SD Card, Wi-Fi (Web-based)
    Temperature:

  • Nozzle temperature: 170 – 270
  • Heated bed temperature: 50 – 100
  • Operational temperature: 10 – 40
  • Storage temperature: 0 – 32

    https://www.thingiverse.com/thing:917718


    Thanks for watching!……..Coming soon!……..Updating……

The open source PANDORA DXs hardware and software is free and made with love. Please show your level of support with a voluntary donation.

Donate:
https://www.paypal.com/cgi-bin/webscr?cmd=_s-xclick&hosted_button_id=RDN7ZGAVFS5UE